Lockable Trailer Pin + Shackle Hitch Receiver

Lockable Trailer Pin and Shackle Hitch Receiver

CAOS Lockable Trailer Hitch Pin 16mm with Rubber Cap and 2 Keys.

The CAOS Lockable Trailer Hitch Pin is easily used to lock and secure your towing hitch to your vehicle's towbar hitch receiver. Simply remove the locking section from the lock by turning the key, slide the pin through both of the holes on the hitch and the towbar hitch receiver. Make sure it is all the way through, then place the locking section on the position and make sure it is correctly locked into place. Place the rubber cap securely over the locking mechanism to prevent dirt and water entering the lock.

Features:

• Weather and grime proof rubber cap over key lock.
• 2 keys.
• 6 O-rings for adjustment to prevent rattling.
• Professional grade powder coated hardened steel construction.
• 202mm overall length and 16mm diameter pin to fit most standard hitch receivers with a maximum outer hitch width of 87mm.
• Compatible with most standard 50mm x 50mm heavy duty towbar hitch receivers.

CAOS Bow Shackle, Hitch Receiver and Pin Set.

Convert your standard 50mm x 50mm square towbar hitch into a rated recovery point by simply removing your towbar tongue and replacing it with this hitch. Suitable for a snatch or winch recovery situation and perfect for those vehicles who have trouble mounting rear recovery points. You should never, ever use a tow ball for recovery purposes as they are not rated for the loads applied when performing vehicle recovery This Recovery hitch will replace the tow ball and is rated for the job!

Features:

• Machined steel hitch receiver with 5 Tonne / 5000kgs working load limit.
• Corrosion resistant powder coated or zinc plated parts.
• Moulded plastic bow shackle protector.
• Twin mounting holes for vertical or horizontal mounting depending on recovery angle.
• Designed to suit most standard 50mm x 50mm heavy duty towbars.
• Complete assembly.

WARNING!! Never use a tow ball for recovery purposes.

Note: The distance between the milled shoulder beside the eye and the centre of the pin hole = 76mm; the length of the square part of the receiver that inserts into the towbar = 104mm. Please check that this item will fit your towbar before ordering.